Flytec 6015 GPS Balloon – Technical data

Variometer

Analog display
± 10 m/s – scale: 0,2 m/s over the entire scale range, ± 20 ft/min x 100
scale: 0,4 ft/min x 100

Digital display
± 300 m/s or ft/min x 100 scale: 0,1 m/s or 0,1 ft/min x 100 integrator adjustable from 1 up to 30 seconds

Acoustics

4 audio volume settings, climb acoustic is tone- and interval modulated, maximum interval frequency adjustable from 3 m/s up to 11 m/s or Smart-interval, adjustable response threshold ASI (Acoustic Scale Indicator) – may be switched-on/off
discreet sink acoustic tone and loud sink alarm, separately adjustable.

Altimeter (3 different altimeter measuring functions)

maximum altitude:
12’300 m

scale:
1 m or 1 ft

QNH:
indication of air pressure in hPa or in inHg

ALT 1:
absolute altimeter

ALT 2:
absolute- or relative altimeter

ALT 3:
differential altimeter

Thermometer

measuring range:
-20 °C up to +60 °C - display: °C or °F

scale:
0,1 °C or 0,1 °F

calibration range:
+/- 50%

GPS

update rate of 1 sec., independent from preset recording rate.

Wind speedometer (sensor optional)

measuring range:
0 km/h up to 120 km/h – display: km/h, kts or mph

scale:
1 km/h, 1 kt or 1 mph – can be calibrated ± 50%

Barograph

Barograph memory:
recording of the 50 recent trips with date, start time, journey time, max. altitude and min./max. Vario

Memory capacity:
120 hours recording at 30 sec. recording interval of position, barometric altitude and GPS-altitude, satellite constellation and speed over ground.

Recording interval:
1 up to 30 sec.

PC-connection:
USB-1.1 cable, analysis with FlyChart

Software

Flychart

provides additional, individual settings, such as audio-pitch, response characteristics, sensitivity etc. Journey statistics, journey data base, barograph print-outs, firmware update with the Flytec-Flasher tool.